NSN 4720-01-419-1657 · NIIN 014191657 · FSC 4720
NO DASHES 4720014191657
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: 2350-01-390-4683
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 212.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.315 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.315 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.920 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 16.500 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.188 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.188 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.312 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.312 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES MINIMUM 3.090 AND INCHES MAXIMUM 3.160 |
| AFQN | FLANGE LENGTH | FIRST END INCHES MINIMUM 3.090 AND INCHES MAXIMUM 3.160 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.780 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.780 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.469 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.469 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1200.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 300.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 25.750 |
| CTCJ | FLANGE STYLE | |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED WIRE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12365278-115 | 19207 |
| 12365278-115 | 87373 |
| 1C02865PNN0256A | 01276 |
| 12365278-115 | 01276 |
| 12365278 | 06085 |
| 12365278-115 | 06085 |