NSN 4720-01-431-1355 · NIIN 014311355 · FSC 4720
NO DASHES 4720014311355
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 257.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.405 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.495 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.960 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 16.500 |
| ADJS | EXTERIOR COLOR | RED |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 2.125 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 2.500 |
| AGAV | END ITEM IDENTIFICATION | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| AHNC | CONNECTION STYLE | |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SPLIT |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SPLIT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 20000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 5000.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 10000.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 24.000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SIXTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517, 100R13, 81343 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 78C-6N-6N-20-24 | 61463 |
| 78C-6N-6N-20-24-20-24-270 | 87373 |
| 78C-6N-6N-20-24-20-24-270 | 98441 |
| 9019-6.0 | 0W0U5 |
| 9019-6.4.1 | 0W0U5 |