NSN 4720-01-431-1356 · NIIN 014311356 · FSC 4720
NO DASHES 4720014311356
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 257.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.490 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 6.000 |
| AGAV | END ITEM IDENTIFICATION | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1000.0 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.312 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.312 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 250.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 500.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 24.000 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT (UNJ) |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 881-39-06-16-16 | 61463 |
| 8813906-16-16-16-24 | 87373 |
| 8813906-16-16-16-24 | 98441 |
| 9019-6.0 | 0W0U5 |
| 9019-6.4.2 | 0W0U5 |