HOSE ASSEMBLY,NONMETALLIC

Name: HOSE ASSEMBLY,NONMETALLIC
Brand: Atlas Air Supply
SKU: 4720014655669
Availability: LimitedAvailability

Hose and Flexible Tubing

Application: OH-58D,HELICOPTER,OBSERVATION (AHIP)

Technical characteristics

21 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAGR	CROSS-SECTIONAL SHAPE STYLE
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	FIRST END RIGHT-HAND
AARX	INSIDE DIAMETER	INCHES NOMINAL 0.547
ABKV	OUTSIDE DIAMETER	INCHES NOMINAL 0.344
ACKH	MINIMUM INSIDE BENDING RADIUS	INCHES 2.500
ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	28.0
AGAV	END ITEM IDENTIFICATION	OH-58D,HELICOPTER,OBSERVATION (AHIP)
AHNC	CONNECTION STYLE
AKUU	END CONNECTION DESIGN	FIRST END ELBOW
AWLS	CONNECTION TYPE	FIRST END THREADED INTERNAL TUBE
CQBD	BURST TEST PRESSURE	POUNDS PER SQUARE INCH 3600.0
CQJX	NOMINAL THREAD SIZE	FIRST END INCHES 0.375
CQQF	OPERATING PRESSURE	LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 600.0
CQRB	SEAT ANGLE	FIRST END DEGREES 37.0
CRFY	FLOW ANGLE	FIRST END DEGREES 90.0
CRXX	MEASURING METHOD AND LENGTH	INCHES NOMINAL WORKING 26.500
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	HOSE ASSEMBLY-NON FIRE RESISTANT, FLARED, RUBBER
FEAT	SPECIAL FEATURES	SHALL BE FAA-TSO-C53A TYPE A CERTIFIED WITH TSO TAG ATTACHED; WHEN ORDERING IDENTIFY WITH BELL STANDARD PART NUMBER FROM THE SOURCES LISTED ON QPL OF BHTI PROCUREMENT SPECIFICATION 299-947-045 ONLY
SCMP	ITEM STRUCTURAL COMPOSITION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
THSD	THREAD SERIES DESIGNATOR	FIRST END UNIFIED NATIONAL JOINT FINE (UNJF)

3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.