NSN 4720-01-511-5124 · NIIN 015115124 · FSC 4720
NO DASHES 4720015115124
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT 0.0 AND FAHRENHEIT 120.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.550 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 0.750 |
| ADJS | EXTERIOR COLOR | TAN |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 810.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 205 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 410.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 12.875 AND INCHES MAXIMUM WORKING 13.125 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY |
| FEAT | SPECIAL FEATURES | MATERIALS, INNER LINER-POLYTETRAFLUOROETHYLENE, INNER TUBE-SILICON, REINFORCEMENT BRAID-POLYETHERETHERKETONE (HTX), OUTER BRAID-NOMEX (TAN); HS89-06 HOSE; FITTING MATERIAL SPEC ASTM A479 OR A276, SURFACE TREATMENT SPEC QQ-P-35; MRC ADLG EXCEPT HEX SIZE |
| MARK | SPECIAL MARKINGS | HYDRAFLOW 24984 P/N 89309HGH0130 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED POLYAMIDE CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER PLASTIC, POLYVINYL CHLORIDE |
| SPCL | SPECIAL TEST FEATURES | DIELECTRIC REQUIREMENTS OF MIL-STD-202 METHOD 301, 1400 VDC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 89309HGH0130 | 24984 |
| 89309 | 24984 |
| S9515-AL-MMA-010 | 53711 |
| S9515-AL-MMA-010, 7-16 ITEM 64 | 53711 |
| NV822201 | 73030 |
| NV822201 FIND 362 | 73030 |