NSN 4720-01-514-1858 · NIIN 015141858 · FSC 4720
NO DASHES 4720015141858
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: POWER UNIT HYDRAULICS
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 212.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.880 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.000 |
| AGAV | END ITEM IDENTIFICATION | POWER UNIT HYDRAULICS |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 17000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.8125 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 4250 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 68.000 |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | FIRST END INCHES 0.500 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, NONMETALLIC |
| FEAT | SPECIAL FEATURES | CONSTRUCTION: SYNTHETIC RUBBER TUBE; TWO BRAIDS OF SPECIAL HIGH TENSILE STEEL WIRE REINFORCEMENT; MSHA ACCEPTED SYNTHETIC RUBBER COVER. APPLICATION AND TEMPERATURE RANGE: HIGH PRESSURE SERVICE HOSE FOR USE WITH: PETROLEUM-AND POLYESTER-BASED HYDRAULIC FLUIDS AND LUBRICATING OILS WITHIN A TEMPERATURE RANGE OF -40 DEGREES F TO +212 DEGREES F CONTINUOUS AND +257 DEGREES F INTERMITTENT: WATER, WATER/GLYCOL, AND WATER/OIL EMULSION HYDRAULIC FLUIDS UP TO +185 DEGREE F: AIR WITHIN A TEMPERATURE RANGE OF -40 DEGREES F TO +158 DEGREES F. FOR AIR PRESSURE ABOVE 250 PSI THE COVER SHOULD BE PIN PRICKED. |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 381J11JS080808C-68 IN | 87373 |
| F302J11JS080808C-68 IN | 87373 |
| 178470 | 98523 |
| 2072B001 REV L FIND NO. 67 | 98523 |