NSN 4720-01-531-4330 · NIIN 015314330 · FSC 4720
NO DASHES 4720015314330
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: WATERJET HJ241, FREEZER
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1600.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AHNC | CONNECTION STYLE | |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.000 |
| AGAV | END ITEM IDENTIFICATION | WATERJET HJ241, FREEZER |
| CRXX | MEASURING METHOD AND LENGTH | MILLIMETERS NOMINAL EXCLUDING END FITTINGS 300.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; HOSE 611-6, FITTING SAD6170606; CLEANED BY AIR MATE SYSTEM |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | FIRST END BSP.PL |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED TEXTILE YARN |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.375 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 400.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 60.0 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.630 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 111213 | 1PWP4 |
| ASSY CT HSE 10 001 | 1PWP4 |