NSN 4720-01-535-0888 · NIIN 015350888 · FSC 4720
NO DASHES 4720015350888
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: MISSILE GAS SYSTEM
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AGAV | END ITEM IDENTIFICATION | MISSILE GAS SYSTEM |
| AAAR | NOMINAL PIPE SIZE ACCOMMODATED | FIRST END INCHES 2.000 |
| AAAR | NOMINAL PIPE SIZE ACCOMMODATED | SECOND END INCHES 1.500 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; CRITICAL TECHNOLOGY; SWIVEL FLANGE END FITTINGS WITH 90 DEGREE DOGLEG ELBOW 45 INCHES FROM STRAIGHT END, 21 INCHES FROM ELBOW END; COMBINED LENGTH 73.1 INCHES |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT 122.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.220 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.810 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AECS | BOLT HOLE QUANTITY | 4 |
| AHNC | CONNECTION STYLE | |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.015 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1400.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 350.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 13.250 |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END FLANGE NICKEL ALLOY 400 |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| CTCJ | FLANGE STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL EXCLUDING END FITTINGS 66.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 360.0 |
Cross-references
29 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.