NSN 4720-00-674-9139 · NIIN 006749139 · FSC 4720
NO DASHES 4720006749139
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.312 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.750 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 32.625 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | FITTINGS COLOR CODED MIL-F-5509 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.875 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 50.0 |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 600.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 20.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND WATER RESISTANT |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.344 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.562 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.562 |
| AECS | BOLT HOLE QUANTITY | 4 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.000 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 2.000 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
Supersedes
This item replaces cancelled NIIN 007240584. An older drawing citing one of those numbers resolves here.