NSN 4730-00-035-7606 · NIIN 000357606 · FSC 4730
NO DASHES 4730000357606
In Stock
ELBOW,FLANGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AECS | BOLT HOLE QUANTITY | 4 |
| AECS | BOLT HOLE QUANTITY | 6 |
| AHSJ | LEG LENGTH | ALL ENDS INCHES MINIMUM 5.000 AND INCHES MAXIMUM 3.500 |
| AKGF | NOMINAL WIDTH | SECOND END INCHES 4.750 |
| AKGG | NOMINAL LENGTH | SECOND END INCHES 4.750 |
| ARKN | FLANGE SHAPE | FIRST END ROUND WITH HOLES |
| ARKN | FLANGE SHAPE | SECOND END RECTANGULAR WITH HOLES |
| AWLS | CONNECTION TYPE | FIRST END FLANGE |
| AWLS | CONNECTION TYPE | SECOND END FLANGE |
| CRFY | FLOW ANGLE | DEGREES 90.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | FIRST END INCHES 0.531 |
| CWCK | NOMINAL THICKNESS | FIRST END INCHES 7.500 |
| CWCK | NOMINAL THICKNESS | SECOND END INCHES 0.625 |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | FIRST END INCHES 0.594 |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | SECOND END INCHES 0.750 |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | FIRST END INCHES 6.250 |
| CWCY | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES 3.375 |
| CWDC | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES 3.375 |
| CWDF | FLANGE FACE DESIGN | FIRST END RAISED WITH CURVE AND COUNTERBORE |
| CWDH | RAISED FACE NOMINAL HEIGHT | FIRST END INCHES 0.531 |
| CWDL | RAISED FACE NOMINAL DIAMETER | FIRST END INCHES 5.750 |
| FEAT | SPECIAL FEATURES | PIVOTAL FEATWLE FOR SHAFT 2ND END |
| MATT | MATERIAL | OVERALL ALUMINUM |