NSN 4730-00-627-1366 · NIIN 006271366 · FSC 4730
NO DASHES 4730006271366
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BBDF | WRENCHING FEATURE STYLE | |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.996 AND INCHES MAXIMUM 1.003 |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.811 |
| MATT | MATERIAL | ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-268,T4 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.811 |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.660 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES NOMINAL 0.377 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES NOMINAL 0.826 |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | INCHES NOMINAL 1.209 |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | INCHES NOMINAL 1.386 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES NOMINAL 0.300 |
| ATKZ | FIRST END THREAD LENGTH | INCHES MINIMUM 1.051 AND INCHES MAXIMUM 1.096 |
| ATLF | SECOND END THREAD LENGTH | INCHES NOMINAL 0.562 |
| AAQL | BODY STYLE | |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES NOMINAL 0.422 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.459 |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | |
| CRMX | SECOND END THREAD QUANTITY PER INCH | 16 |
| CRNB | SECOND END NOMINAL THREAD SIZE | INCHES 0.750 |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQPR | FIRST END SEAT ANGLE | DEGREES NOMINAL 12.0 |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 0.750 |
| CRCN | SECOND END SEAT ANGLE | DEGREES NOMINAL 12.0 |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 16 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 1.826 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES NOMINAL 2.460 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.740 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES NOMINAL 0.437 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21939-8H8 | 96906 |
| MS21908-8 | 96906 |
| MS21939-8H8 | 0U583 |
| SAE-AS18280 | 0U583 |