NSN 4730-00-628-7238 · NIIN 006287238 · FSC 4730
NO DASHES 4730006287238
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 16 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 6.170 AND INCHES MAXIMUM 6.180 |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES NOMINAL 0.180 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES NOMINAL 5.020 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES NOMINAL 0.540 |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | INCHES NOMINAL 2.720 |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | INCHES NOMINAL 4.310 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES NOMINAL 0.144 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 0.309 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES NOMINAL 0.180 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES NOMINAL 1.680 |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 0.750 |
| CRMX | SECOND END THREAD QUANTITY PER INCH | 24 |
| CRNB | SECOND END NOMINAL THREAD SIZE | INCHES 0.312 |
| FEAT | SPECIAL FEATURES | WRENCHING END THREADS HAS ONE 0.078IN. HOLE THRU |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| ATKZ | FIRST END THREAD LENGTH | INCHES NOMINAL 0.710 |
| BBDF | WRENCHING FEATURE STYLE | |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.062 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.665 |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.759 |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.660 AND INCHES MAXIMUM 0.662 |