NSN 4730-00-864-8468 · NIIN 008648468 · FSC 4730
NO DASHES 4730008648468
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES NOMINAL 0.940 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES MINIMUM 0.555 AND INCHES MAXIMUM 0.565 |
| AAWX | CONCENTRIC HOLE DEPTH | INCHES NOMINAL 0.500 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 200000 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.187 AND INCHES MAXIMUM 0.197 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES MINIMUM 0.640 AND INCHES MAXIMUM 0.650 |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| BBKK | DISTANCE FROM BOLT END TO HOLE CENTER | INCHES NOMINAL 0.100 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES NOMINAL 0.060 |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.375 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.025 AND INCHES MAXIMUM 1.035 |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 28 |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 0.250 |
| MATT | MATERIAL | STEEL |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.540 |
| ATKZ | FIRST END THREAD LENGTH | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.215 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6322 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES MINIMUM 0.700 AND INCHES MAXIMUM 0.710 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES NOMINAL 0.060 |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES NOMINAL 0.060 |
| BBDF | WRENCHING FEATURE STYLE | |
| ACLK | FIRST END THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE S-1001 CLASS C |
| SFTT | SURFACE TREATMENT | CADMIUM |
| ADDV | COTTER PIN HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |