NSN 4730-00-890-7946 · NIIN 008907946 · FSC 4730
NO DASHES 4730008907946
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S-6427 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES NOMINAL 0.810 |
| AASL | HEAD DIAMETER | INCHES NOMINAL 1.870 |
| CRMX | SECOND END THREAD QUANTITY PER INCH | 28 |
| ATKZ | FIRST END THREAD LENGTH | INCHES NOMINAL 0.840 |
| ATLF | SECOND END THREAD LENGTH | INCHES NOMINAL 0.190 |
| BBDF | WRENCHING FEATURE STYLE | |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 1.243 AND INCHES MAXIMUM 1.244 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 1.242 AND INCHES MAXIMUM 1.243 |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 1.247 AND INCHES MAXIMUM 1.249 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES NOMINAL 3.180 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES NOMINAL 4.780 |
| ACLT | SECOND END STYLE DESIGNATOR | |
| ACMR | SECOND END THREAD CLASS | 2B |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED INTERNAL TUBE |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES MINIMUM 1.120 AND INCHES MAXIMUM 1.180 |
| CRNB | SECOND END NOMINAL THREAD SIZE | INCHES 0.250 |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | STEEL |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 12 |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 1.125 |
| CRCN | SECOND END SEAT ANGLE | DEGREES NOMINAL 12.0 |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | INCHES NOMINAL 5.700 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES NOMINAL 0.090 |
| BBKZ | SECOND RADIAL FLUID HOLE DIAMETER | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 4.570 |
| BBLC | DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 1.280 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES NOMINAL 6.060 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES NOMINAL 0.190 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.250 |