NSN 4730-00-897-2460 · NIIN 008972460 · FSC 4730
NO DASHES 4730008972460
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.337 |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.334 |
| MATT | MATERIAL | STEEL |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.502 |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | INCHES NOMINAL 1.425 |
| BBKZ | SECOND RADIAL FLUID HOLE DIAMETER | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.130 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 0.705 |
| BBDF | WRENCHING FEATURE STYLE | |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.750 |
| BBKX | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER | INCHES NOMINAL 1.875 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES NOMINAL 0.124 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES NOMINAL 0.377 |
| CPHW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SIXTH DIAMETER | INCHES NOMINAL 1.986 |
| CQFM | HARDNESS RATING | ROCKWELL SUPERFICIAL 15-N NOMINAL 85.0 |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.600 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.381 |
| CPHT | SIXTH DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.310 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES NOMINAL 2.150 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES NOMINAL 0.186 |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | INCHES NOMINAL 1.810 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES NOMINAL 1.275 |
| BBLC | DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 0.625 |
| BBKQ | FIFTH DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.406 |