NSN 4730-01-082-3442 · NIIN 010823442 · FSC 4730
NO DASHES 4730010823442
In Stock
FLANGE,PIPE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABNM | THICKNESS | INCHES NOMINAL 0.781 |
| ABXN | SOCKET DEPTH | INCHES NOMINAL 0.500 |
| ABXP | SOCKET DIAMETER | INCHES NOMINAL 0.531 |
| ACSV | TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | INCHES NOMINAL 0.250 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES NOMINAL 1.125 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES NOMINAL 1.125 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.312 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.312 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | INCHES NOMINAL 1.750 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 1.750 |
| AHNX | BOLT HOLE DIAMETER | INCHES NOMINAL 0.328 |
| AJED | RAISED FACE HEIGHT | INCHES MINIMUM 0.031 AND INCHES MAXIMUM 0.062 |
| AJEE | RAISED FACE DIAMETER | INCHES NOMINAL 0.688 |
| AJEG | NECK HEIGHT | INCHES NOMINAL 0.837 |
| AJEM | FLANGE SECTION STYLE | |
| AKWE | FACE SEATING SURFACE CONDITION | MACHINED |
| FEAT | SPECIAL FEATURES | W/FOUR CAP SCREWS,FOUR WASHERS AND ONE O-RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| PRTY | OPERATING PRESSURE AND TYPE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) SALT WATER MAXIMUM REQUIRED 3000.0 |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 845-4687676ASSY | 53711 |
| 845-4687676 | 80064 |
| 845-4687676ASSY43 | 80064 |
| 4687676-0043 | 96169 |
| 2621-228-02 ASSY43 | 96169 |