NSN 4730-01-115-6385 · NIIN 011156385 · FSC 4730
NO DASHES 4730011156385
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES MINIMUM 0.162 AND INCHES MAXIMUM 0.182 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.570 |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.684 AND INCHES MAXIMUM 0.692 |
| ATKZ | FIRST END THREAD LENGTH | INCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.340 |
| ATLF | SECOND END THREAD LENGTH | INCHES NOMINAL 0.422 |
| BBDF | WRENCHING FEATURE STYLE | |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.327 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.431 AND INCHES MAXIMUM 0.435 |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.362 AND INCHES MAXIMUM 0.367 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES MINIMUM 0.084 AND INCHES MAXIMUM 0.108 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.570 |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.650 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES MINIMUM 0.162 AND INCHES MAXIMUM 0.182 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES MINIMUM 0.670 AND INCHES MAXIMUM 0.710 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES MINIMUM 0.950 AND INCHES MAXIMUM 0.990 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.200 |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CQPR | FIRST END SEAT ANGLE | DEGREES MINIMUM 0.4 AND DEGREES MAXIMUM 0.5 |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 0.438 |
| CRCN | SECOND END SEAT ANGLE | DEGREES NOMINAL 12.0 |
| CRNB | SECOND END NOMINAL THREAD SIZE | INCHES 0.375 |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | STEEL COMP 303 OR STEEL COMP 302 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 116533-2 | 55820 |
| 116533 | 66195 |
| 116533-2 | 66195 |
| 4730PL1960052 | 9009H |