NSN 4730-01-260-8069 · NIIN 012608069 · FSC 4730
NO DASHES 4730012608069
In Stock
INVERTED NUT,TUBE COUPLING
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AARN | FABRICATION METHOD | COLD DRAWN OR ROLLED |
| AASG | CASEHARDENING INDICATOR | NOT CASE-HARDENED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.650 AND INCHES MAXIMUM 0.670 |
| ABUJ | THREAD SIZE | 0.750-16 |
| ACSV | TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | INCHES NOMINAL 0.500 |
| AJFY | SEAT ANGLE IN DEG | 33.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.863 AND INCHES MAXIMUM 0.887 |
| AWQD | STRENGTH RATING | POUNDS PER SQUARE INCH (PSI) MINIMUM PROOF LOAD 66000.0 |
| BSPX | SMALLEST INSIDE DIAMETER | INCHES MINIMUM 0.505 AND INCHES MAXIMUM 0.508 |
| CCNF | APPLICATION/FUNCTION | U/O H TEMP,HP PNEUMATIC AND HYD SYS,FUEL SYS,AND CYROGENIC SYS |
| FEAT | SPECIAL FEATURES | DRILLED HEX. 3 HOLES 0.051 IN. MIN 0.056 IN. MAX DIA |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6, ALLOY 2024, T851 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS591 |