NSN 6105-01-007-8116 · NIIN 010078116 · FSC 6105
NO DASHES 6105010078116
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 5.813 |
| AAJU | OVERALL LENGTH | INCHES 10.812 |
| AAJV | OVERALL WIDTH | INCHES 5.625 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 1.2500 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0470 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | K48 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.3333 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 2.750 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.250 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 220.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |