NSN 4820-01-123-7658 · NIIN 011237658 · FSC 4820
NO DASHES 4820011237658
In Stock
VALVE,CALIBRATED FLOW
Valves, Nonpowered
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | |
| ACLH | FIRST END OUTSIDE DIAMETER TUBE ACCOMMODATED | INCHES NOMINAL 0.500 |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLR | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL BOSS |
| ACLT | SECOND END STYLE DESIGNATOR | |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ACTE | FIRST END SEAT ANGLE IN DEG | 24.0 |
| ADQU | FLOW CONTROL DEVICE | DISK |
| ADQZ | END CONNECTION QUANTITY | 2 |
| ADSY | VALVE DISCHARGE FLOW RATE | GALLONS PER MINUTE 5.5 |
| AEVN | REGULATION TYPE | AUTOMATIC SINGLE STAGE |
| AEVZ | MAXIMUM INLET PRESSURE RATING | POUNDS PER SQUARE INCH (PSI) 3300.0 |
| AZKQ | TEMP RATING | FAHRENHEIT MINIMUM -50.0 AND FAHRENHEIT MAXIMUM 160.0 |
| FEAT | SPECIAL FEATURES | 1.0 GPM BY-PASS RATE AT 50.0 PSID MAX 160.0 DEG F; HEX WRENCHING FACILITY |
| MATT | MATERIAL | BODY STEEL COMP 440C OR STEEL COMP 630 |
| MATT | MATERIAL | PACKING RUBBER SYNTHETIC |
| MATT | MATERIAL | FLOW CONTROL DEVICE STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763, CLASS 440C OR ASSN STD 1ST MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FLOW CONTROL DEVICE FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763, CLASS 302, 303, 304, 305, 310, OR 316 |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PETROLEUM BASE |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | SECOND END UNIFIED NATIONAL COARSE (UNC) MODIFIED 1.3125-12 |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) 0.7500-16 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 428321 | 62983 |
| 145HS142-2 | 77272 |
| 145HS142-2 | A0126 |
| 11266 | 16780 |
| 11266-1 | 16780 |