NSN 3020-00-018-5758 · NIIN 000185758 · FSC 3020
NO DASHES 3020000185758
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| STYL | STYLE DESIGNATOR | |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 0.5625 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 79.0 AND ROCKWELL C MAXIMUM 85.0 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6000 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWTR | HUB STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.8600 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.8880 |
| FEAT | SPECIAL FEATURES | COUNTERBORE LOCATED ON SECOND END,1 IN. DIA,0.090 IN. DEEP |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.1870 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.684 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 9 |
Supersedes
This item replaces cancelled NIIN 000758490. An older drawing citing one of those numbers resolves here.