NSN 3020-00-484-7233 · NIIN 004847233 · FSC 3020
NO DASHES 3020004847233
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQD | PITCH ANGLE | DEGREES 58.0000 |
| AJLA | TEETH QUANTITY | 16 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.303 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CWPP | PRESSURE ANGLE | DEGREES 22.4999 |
| ABSA | SPLINE QUANTITY | 10 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.3281 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.3920 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.297 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.662 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.700 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.609 |
Supersedes
This item replaces cancelled NIIN 000030994. An older drawing citing one of those numbers resolves here.