NSN 3130-00-766-3228 · NIIN 007663228 · FSC 3130
NO DASHES 3130007663228
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.6500 |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| AGNF | BASE LENGTH | INCHES MINIMUM 0.8640 AND INCHES MAXIMUM 0.8840 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.2600 AND INCHES MAXIMUM 0.2670 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.2400 AND INCHES MAXIMUM 1.2600 |
| ACYB | BASE THICKNESS | INCHES MINIMUM 0.2400 AND INCHES MAXIMUM 0.2600 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 2.0100 |
| AFWC | HOUSING HEIGHT | INCHES MINIMUM 2.6200 AND INCHES MAXIMUM 2.6800 |
| AFWD | HOUSING LENGTH | INCHES MINIMUM 0.5210 AND INCHES MAXIMUM 0.5410 |
| AFWE | HOUSING WIDTH | INCHES MINIMUM 2.9700 AND INCHES MAXIMUM 3.0300 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES MINIMUM 1.6400 AND INCHES MAXIMUM 1.6600 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | OPPOSITE OF P/N 4C24016-101A |
| MATT | MATERIAL | HOUSING ALUMINUM |