NSN 3040-00-228-4716 · NIIN 002284716 · FSC 3040
NO DASHES 3040002284716
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
8 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | |
| MATT | MATERIAL | STEEL |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.935 AND INCHES MAXIMUM 1.936 |
| FEAT | SPECIAL FEATURES | SMALLER END HAS A BORE,0.060 IN. THRU AND 1.130 IN. DEEP,COUNTERBORED,0.120 IN. DIA. AND 1.220 IN. DEEP,AND TAP DRILLED 0.250 IN. WITH THE FOLLOWING SPEC: 1/4-28 UNF-2B,ALSO,THIS END HAS A KEYWAY,0.125 TO 0.135 IN. WIDE,CENTERED 85.0 TO 95.0 DEG. TO THE CROSS DRILL AT THE OPPOSITE END. THE LARGER END IS SLOTTED,0.877 TO 0.882 IN. WIDE AND 0.205 TO 0.235 IN. DEEP,CENTERED 90.0 DEG,TO CROSS DRILL. CROSS DRILL IS PARTIALLY THREADED ON ONE SIDE,0.171 TO 0.201 IN. DEEP,7/16-20 UNJF-3B,LARGER END (SHOULDER) IS BORED,1.055 TO 1.065 IN. DIA AND 3.340 TO 3.460 IN. DEEP. ITEM IS TAPERED 10.0 DEG BETWEEN THE SHOULDER AND THE THIRD STEP FIRST END; THIS ITEM IS CRITICAL TO THE FUNCTION OF THE C-5 LANDING GEAR. ALL SPECIFIC ACTIONS, DIMENSIONS AND TOLERANCES PERTAINING TO THIS ITEM MUST BE MET TO ENSURE PROPER FUNCTION OF THIS ITEM AND THE LANDING GEAR. ESA REQUIRES STRICT OVERSIGHT TO ENSURE THAT ALL TECH REQUIRMENTS ARE CURRENT |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 9.260 |
| AAHP | SECOND END STYLE |