NSN 5930-01-123-6509 · NIIN 011236509 · FSC 5930
NO DASHES 5930011236509
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.437 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.245 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.219 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.874 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.170 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 2 |
| AKPY | THROW QUANTITY | 2 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 6.0 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM CONTACT POSITION 1 180.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 2 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | SINGLE SECTION REAR BREAKS BEFORE MAKES |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 90.0 |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 5.0 AND AMPERES INDUCTIVE LOAD 2.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |