NSN 5905-00-721-2649 · NIIN 007212649 · FSC 5905
NO DASHES 5905007212649
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.175 AND INCHES MAXIMUM 0.205 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.735 AND INCHES MAXIMUM 1.765 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.959 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.000 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.348 |
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.212 AND INCHES MAXIMUM 0.226 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.385 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| AAPN | SECTION QUANTITY | 1 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 1.025 AND INCHES MAXIMUM 1.095 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AAQL | BODY STYLE | |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.2 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.000 |
| AEDX | SHAFT STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |