NSN 6105-01-234-0207 · NIIN 012340207 · FSC 6105
NO DASHES 6105012340207
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 6.812 |
| AAJU | OVERALL LENGTH | INCHES 14.375 |
| AAJV | OVERALL WIDTH | INCHES 6.500 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.907 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.186 AND INCHES MAXIMUM 0.188 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.094 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.437 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | SEPARATELY VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS RUNNING 2.6 |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CNMM | FRAME SIZE DESIGNATION | P56CZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.750 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.625 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.187 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 65.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.875 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3450.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.600 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END FIRST STYLE HAS 0.187 IN. DIA DRILL THRU HOLE; SHAFT END SECOND STYLE 0.624 IN. MIN,0.625 IN. MAX DIA; SECOND STYLE KEYWAY EXTENDS ACROSS FIRST STYLE; SHAFT END THIRD STYLE 0.844 IN. MIN,0.849 IN. MAX DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 |
Supersedes
This item replaces cancelled NIIN 016119449. An older drawing citing one of those numbers resolves here.