NSN 6105-00-918-4719 · NIIN 009184719 · FSC 6105
NO DASHES 6105009184719
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| AKPS | DUTY CYCLE | CONTINUOUS |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJT | OVERALL HEIGHT | INCHES 3.249 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 200.0 |
| AAJU | OVERALL LENGTH | INCHES 5.312 |
| AAJV | OVERALL WIDTH | INCHES 3.249 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.5000 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMK | WOODRUFF KEY SIZE DESIGNATION | 204 |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.8125 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 2.750 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 11400.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 1.800 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3750 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AXGY | MOUNTING METHOD | FACE |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.5000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.375 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.312 |
Supersedes
This item replaces cancelled NIIN 001066143. An older drawing citing one of those numbers resolves here.