NSN 4720-00-965-1303 · NIIN 009651303 · FSC 4720
NO DASHES 4720009651303
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.030 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.625 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -100.0 AND FAHRENHEIT 450.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.234 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.797 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.205 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.250 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 6.500 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 60.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.156 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.156 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.594 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.594 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 6.625 |
| CTCJ | FLANGE STYLE | |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |