NSN 5920-00-581-7958 · NIIN 005817958 · FSC 5920
NO DASHES 5920005817958
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 1.296 AND INCHES MAXIMUM 1.328 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.718 AND INCHES MAXIMUM 0.750 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.531 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.765 AND INCHES MAXIMUM 1.797 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.109 AND INCHES MAXIMUM 1.141 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.204 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AEVB | MOUNTING HOLE STYLE | |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.500 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.875 AND INCHES MAXIMUM 0.907 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 250.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR GLASS OR PLASTIC POLYCAPROLACTAM OR GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE OR GLASS OR PLASTIC POLYESTER OR GLASS OR PLASTIC DIALLYL PHTHALATE OR GLASS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 TO 14 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG AND MIL SPEC SINGLE MATERIAL RESPONSE -IL--14, TYE -AI-60 AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---19833, TYE GDI-30F |
| SFTT | SURFACE TREATMENT | TERMINAL SOLDER AND TIN |
| AGUV | CAP DIAMETER | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.016 |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| MATT | MATERIAL | TERMINAL COPPER |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.406 |
Supersedes
This item replaces cancelled NIINs 002963289 · 005660052 · 007298931 · 008797972. An older drawing citing one of those numbers resolves here.