NSN 5307-01-237-2061 · NIIN 012372061 · FSC 5307
NO DASHES 5307012372061
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.900 AND INCHES MAXIMUM 0.930 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.685 AND INCHES MAXIMUM 0.725 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.643 AND INCHES MAXIMUM 0.647 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.052 AND INCHES MAXIMUM 0.057 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.740 AND INCHES MAXIMUM 1.780 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.3125 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.3125 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.075 AND INCHES MAXIMUM 0.095 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.314 |
| CSYM | SURFACE FINISH | NUT THD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | STUD THD MICROINCHES 32.0 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.319 AND INCHES MAXIMUM 0.320 |
| FEAT | SPECIAL FEATURES | HEX DRIVE HOLE AT STUD END,0.156 TO 0.158 IN. DISTANCE ACROSS FLATS,0.140 TO 0.160 IN. DP; SHOULDER OFF-CENTER FROM STUD HORIZ CL 0.040 IN. |
| MATT | MATERIAL | NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE C50TF13 CL-B,CAGEC FSC- 07482 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |