NSN 5305-01-253-2996 · NIIN 012532996 · FSC 5305
NO DASHES 5305012532996
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.595 AND INCHES MAXIMUM 0.625 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.250 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.044 AND INCHES MAXIMUM 0.050 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL STEEL COMP 316 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |