NSN 3110-01-195-5143 · NIIN 011955143 · FSC 3110
NO DASHES 3110011955143
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.2500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 4.2492 AND INCHES MAXIMUM 4.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 4.7492 AND INCHES MAXIMUM 4.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0010 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | LUBE FILL 10 PERCENT OF VOLUME |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81937 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER FED SPEC SINGLE MATERIAL RESPONSE QQ-B-613 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | INNER RING NICKEL AND CHROMIUM AND CHROMIUM |
| SFTT | SURFACE TREATMENT | BALL NICKEL AND CHROMIUM AND CHROMIUM |
| SFTT | SURFACE TREATMENT | OUTER RING NICKEL AND CHROMIUM AND CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC ALL TREATMENT RESPONSES QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC ALL TREATMENT RESPONSES QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BALL FED SPEC ALL TREATMENT RESPONSES QQ-C-320 |
| STYL | STYLE DESIGNATOR |