NSN 5340-01-263-4374 · NIIN 012634374 · FSC 5340
NO DASHES 5340012634374
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.045 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.475 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.693 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 2.110 AND INCHES MAXIMUM 2.140 |
| FEAT | SPECIAL FEATURES | INCL REINFORCED CORNER AND CRES FOOT |
| MATT | MATERIAL | BAND STEEL COMP 321 OR STEEL COMP 347 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD 1ST MATERIAL RESPONSE A-S 5510 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5512 |
| STYL | STYLE DESIGNATOR |