NSN 6105-00-870-2498 · NIIN 008702498 · FSC 6105
NO DASHES 6105008702498
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | ELECTRIC NOISE SUPPRESSOR AND THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 2.0000 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0470 |
| AAJT | OVERALL HEIGHT | INCHES 6.312 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AAJU | OVERALL LENGTH | INCHES 8.937 |
| AAJV | OVERALL WIDTH | INCHES 6.312 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90.0 DEGREES |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 5.200 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 110.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.4990 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SPLIT PHASE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 4 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.684 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.2500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Supersedes
This item replaces cancelled NIIN 009090527. An older drawing citing one of those numbers resolves here.