NSN 5130-01-335-4745 · NIIN 013354745 · FSC 5130
NO DASHES 5130013354745
In Stock
GRINDER,PORTABLE
Hand Tools, Power Driven
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.750 |
| ADQF | HANDLE TYPE | STRAIGHT |
| AJER | HOSE INSIDE DIAMETER FOR WHICH DESIGNED | INCHES NOMINAL 0.187 |
| AJWK | WEIGHT | POUNDS MAXIMUM 0.2 |
| AKUM | AIR INLET NOMINAL THREAD DIAMETER | INCHES 0.125 |
| AKUP | NOMINAL CHUCK SIZE | INCHES 0.125 |
| ANCY | HORSEPOWER RATING | 0.1 |
| AYBY | WHEEL DIAMETER ACCOMMODATED | INCHES MAXIMUM 0.250 |
| AYBZ | WHEEL WIDTH ACCOMMODATED | INCHES MAXIMUM 0.250 |
| BRZR | DRIVE END TYPE | COLLET CHUCK |
| BRZT | NO LOAD SPEED IN RPM | NOMINAL 60000.0 |
| FEAT | SPECIAL FEATURES | PENCIL TYPE;REAR EXHAUST;COLLET GUARD;1/4 IN. CARBIDE BUR AND 1/4 IN. DIAMOND PIN CAPACITY;SLIDE THROTTLE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10R0401A | 24047 |
| 10R0401-18 | 24047 |
| 10R0401-18 | 4UEP1 |
Supersedes
This item replaces cancelled NIIN 010394056. An older drawing citing one of those numbers resolves here.