NSN 5130-01-444-8495 · NIIN 014448495 · FSC 5130
NO DASHES 5130014448495
In Stock
GRINDER,PORTABLE
Hand Tools, Power Driven
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 11.578 |
| ACDC | CURRENT TYPE | AC |
| ACUS | ALTERNATING CURRENT RATING IN AMPS | 11.0 |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.0 |
| AKHU | MOUNTING SPINDLE THREAD SIZE | 5/8-11 UNC |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | WHEEL GUARD, SIDE HANDLE, FLANGES, AND SPANNER WRENCH |
| AMSE | VOLTAGE RATING | VOLTS NOMINAL 120.0 |
| APHE | OPERATION METHOD | ELECTRIC |
| APQB | UNIT TYPE | DISK |
| AYBZ | WHEEL WIDTH ACCOMMODATED | INCHES MINIMUM 4.500 AND INCHES MAXIMUM 5.000 |
| BRZR | DRIVE END TYPE | MALE SPINDLE |
| BRZT | NO LOAD SPEED IN RPM | MAXIMUM 11000.0 |
| BRZX | DRIVE FOR WHICH DESIGNED | ANGULAR |
| BRZZ | PLUG CONNECTOR TYPE | 2-PRONG |
| CBBL | FEATURES PROVIDED | DOUBLE INSULATED AND LOCK-ON THROTTLE |
| CTKZ | ANGLE | DEGREES 90.0 |
| FAAZ | PHASE | SINGLE |
| FEAT | SPECIAL FEATURES | 2-POSITION SIDE HANDLE; OVERLOAD PROTECTED MOTOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6116-30 | 40817 |
| 6153-20 | 40817 |
| 6146-33 | 40817 |
| GWS10-45 | 53867 |
| DWE4214 | 7CGP8 |
| 6116-30 MILWAUKEE | 00NS2 |
| 6153-20 MILWAUKEE | 00NS2 |