NSN 5130-01-486-2265 · NIIN 014862265 · FSC 5130
NO DASHES 5130014862265
In Stock
GRINDER,PORTABLE
Hand Tools, Power Driven
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 9.75 |
| ADQF | HANDLE TYPE | BODY GRIP |
| AJER | HOSE INSIDE DIAMETER FOR WHICH DESIGNED | INCHES NOMINAL 0.375 |
| AKHU | MOUNTING SPINDLE THREAD SIZE | 5/8 IN. - 11 |
| AKUM | AIR INLET NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | WHEEL GUARD; FLANGE; NUT AND WRENCH |
| ANCY | HORSEPOWER RATING | 1.0 |
| AYBY | WHEEL DIAMETER ACCOMMODATED | INCHES MAXIMUM 4.5 |
| AYBZ | WHEEL WIDTH ACCOMMODATED | INCHES MAXIMUM 0.25 |
| BRZR | DRIVE END TYPE | MALE SPINDLE |
| BRZT | NO LOAD SPEED IN RPM | NOMINAL 12000.0 |
| BRZX | DRIVE FOR WHICH DESIGNED | ANGULAR |
| CBBL | FEATURES PROVIDED | LEVER THROTTLE AND LOCK-OFF SAFETY THROTTLE AND REAR EXHAUST AND WHEEL GUARD |
| CTKZ | ANGLE | DEGREES 90.0 |
| FEAT | SPECIAL FEATURES | 17 CFM NOMINAL; SPINDLE LOCK; 4 POUNDS MAX; WHEEL TYPE 27 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FRS G2A120RP1045 | 55719 |
| FRS M2A120RP1045 | 55719 |
| HA120RP1045 | 65853 |
| HA120RP105 | 65853 |
| M2A120RP1045 | 65853 |
Supersedes
This item replaces cancelled NIIN 016045656. An older drawing citing one of those numbers resolves here.