NSN 4720-00-010-0285 · NIIN 000100285 · FSC 4720
NO DASHES 4720000100285
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 15.250 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRSM | VACUUM IN TORR | 50.8 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL TUBE |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.625 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 1A |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.312 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.610 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 45.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 45.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER RUBBER IMPREGNATED FABRIC |