NSN 5136-01-728-7330 · NIIN 017287330 · FSC 5136
NO DASHES 5136017287330
In Stock
TAP,THREAD CUTTING
Taps, Dies, and Collets; Hand and Machine
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| ANMJ | THREAD STRUCTURE | INTERRUPTED |
| ANMM | THREAD FORMING METHOD | CUT |
| AASA | THREAD LENGTH | MILLIMETERS NOMINAL 13.0 |
| FEAT | SPECIAL FEATURES | SCREW THREAD INSERT (STI) TAPS ARE SUITABLE FOR USE WITH WIRE THREAD INSERTS. MANUFACTURED TO PRECISE STANDARDS FROM HIGH SPEED STEEL (HSS) WITH GROUND THREADS AND HAVE A LARGER DIAMETER BUT THE SAME PITCH AS A STANDARD TAP IN ORDER TO ACCOMMODATE THE WIRE INSERT. BOTTOMING TAPS ARE USED TO ENSURE THE MINIMUM THREAD RUNOUT WHEN TAPPING TO THE BOTTOM OF BLIND HOLES. DIAMETER PITCH: M3-0.5. THREAD: METRIC. CLOSE, 4H5H. HIGH SPEED STEEL (HSS). |
| AAZE | SHANK DIAMETER | MILLIMETERS NOMINAL 3.55 |
| ANMP | STARTING CHAMFER TYPE | BOTTOMING |
| ASDB | WIDTH ACROSS FLATS | MILLIMETERS NOMINAL 2.80 |
| CQQR | THREAD PITCH IN MILLIMETERS | 0.5 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | ISO M 3.0 |
| ABHP | OVERALL LENGTH | MILLIMETERS NOMINAL 50.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW THREAD INSERT (STI) TAP/BOTTOMING TAP |
| MATT | MATERIAL | OVERALL STEEL |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 45036 | 58BK0 |