NSN 5905-00-865-5656 · NIIN 008655656 · FSC 5905
NO DASHES 5905008655656
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.285 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.0620 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.062 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.124 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9683 AND INCHES MAXIMUM 0.9688 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.515 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.975 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -670.0 TO 670.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 8 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.60 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.25 TO 0.25 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.140 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 1 AND 2ND SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -2.0 TO 2.0 |
| AEDX | SHAFT STYLE | |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 10.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | ALL SECTIONS 300.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |