NSN 5306-00-297-8753 · NIIN 002978753 · FSC 5306
NO DASHES 5306002978753
In Stock
BOLT,MACHINE
Bolts
Application: MACHINE GUN, GRENADE, 40MM;TANK, COMBAT, FT, 120MM GUN;MACHINEGUN, 50 CAL, BROWING
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| BQDM | HOLE TYPE | DRILLED |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 1 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.272 AND INCHES MAXIMUM 0.316 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.603 AND INCHES MAXIMUM 0.625 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.594 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.440 AND INCHES MAXIMUM 1.540 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY THD LG |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 3 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ASXK | HOLE QUANTITY | 1 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| AGAV | END ITEM IDENTIFICATION | MACHINE GUN, GRENADE, 40MM;TANK, COMBAT, FT, 120MM GUN;MACHINEGUN, 50 CAL, BROWING |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 70.0 AND ROCKWELL B MAXIMUM 100.0 |
Supersedes
This item replaces cancelled NIIN 005170484. An older drawing citing one of those numbers resolves here.