NSN 4720-00-974-8208 · NIIN 009748208 · FSC 4720
NO DASHES 4720009748208
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED STEEL WIRE |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES MINIMUM 0.274 AND INCHES MAXIMUM 0.288 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| FEAT | SPECIAL FEATURES | HOSE PREBENT TO A FIXED POSITION AND SUPPLIED W/SIX CLAMPS |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES MINIMUM 1.495 AND INCHES MAXIMUM 1.500 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES MINIMUM 1.495 AND INCHES MAXIMUM 1.500 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.880 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES MINIMUM 0.187 AND INCHES MAXIMUM 0.218 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES MINIMUM 0.187 AND INCHES MAXIMUM 0.218 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.110 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.414 |
| AGFF | FLANGE WIDTH | SECOND END INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.180 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES MINIMUM 0.274 AND INCHES MAXIMUM 0.288 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1000.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.414 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.414 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.414 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.180 |
| AFQN | FLANGE LENGTH | SECOND END INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.180 |
| AGFF | FLANGE WIDTH | FIRST END INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.180 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 19.760 AND INCHES MAXIMUM WORKING 20.000 |
| CTCJ | FLANGE STYLE | |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 500.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |