NSN 5180-01-738-5173 · NIIN 017385173 · FSC 5180
NO DASHES 5180017385173
In Stock
TOOL KIT,SUPPLEMENTAL,PIPELINE P
Sets, Kits, and Outfits of Hand Tools
Application: 2540-01-695-9131
Technical characteristics
5 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SUPP | SUPPLEMENTARY FEATURES | SPECIAL TOOLS AND TEST EQUIPMENT (STTE) KIT - E2FDS |
| AGAV | END ITEM IDENTIFICATION | 2540-01-695-9131 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.100-2013 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.5-2009 |
| FEAT | SPECIAL FEATURES | KIT IS COMPRISED OF: P/N 12697741, PLATE, COVER (QTY 2); P/N 12697742, ADAPTER KIT - ELECTRICAL TEST KIT (QTY 1);P/N 577564, PILOT PIN ACTUATOR (QTY 1); P/N 577569, REMOVAL TOOL, DIPSTICK (QTY 1); P/N 577574, ADAPTER, PIN (QTY 1); P/N 380003271, STRAIGHT EDGE (QTY 1); P/N SVTSRAD272U, DIP TUBE ASSEBMLY (QTY 1); P/N AT3600-10, ADAPTER, COMPRESSION GUAGE, ENGINE (QTY 1); P/N JDG11065A, ADAPTER, CYLINDER COMPRESSION TESTER (QTY 1); P/N JDG1560, PULLER, MECHANICAL (QTY 1); P/N JDG1571, LOCKING PIN, FLYWHEEL (QTY 1); P/N JDG22, REMOVER, SEAL - SLIDE HAMMER (QTY 1); P/N 810696-1, ADAPTER, PULLER, ENGINE DIPSTICK (QTY 1); P/N FLUKE 715, METER, RANGE CALIBRATOR (QTY 1); P/N SH2C, COUPLING, QUICK DISCONNECT (QTY 1); P/N JDG954-5, INSERTER, SEAL (QTY 1); P/N JDG954-7, ADAPTER, TAPER CRANK (QTY 1); JDG954-8, FORCING SCREW, MECHANICAL PULLER (QTY 1); P/N 12697750, CASE, STORAGE KIT (QTY 1); P/N 12697747, LABEL, WARNING (QTY 1); P/N 12697748, PLATE, INFO (QTY 1); P/N VPCI, INHIBITO |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12697760 | 19207 |