NSN 5305-01-066-9358 · NIIN 010669358 · FSC 5305
NO DASHES 5305010669358
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.317 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.822 AND INCHES MAXIMUM 1.869 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.329 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.552 AND INCHES MAXIMUM 1.572 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.5 AND DEGREES MAXIMUM 100.5 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.695 AND INCHES MAXIMUM 1.762 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY2 CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNF |