NSN 5306-00-933-4583 · NIIN 009334583 · FSC 5306
NO DASHES 5306009334583
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASXK | HOLE QUANTITY | 3 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.125 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.432 |
| BQDM | HOLE TYPE | DRILLED |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.377 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76823-51B464-3A2H |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.256 AND INCHES MAXIMUM 0.317 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
Supersedes
This item replaces cancelled NIIN 008020749. An older drawing citing one of those numbers resolves here.