NSN 5306-00-801-9763 · NIIN 008019763 · FSC 5306
NO DASHES 5306008019763
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.066 AND INCHES MAXIMUM 0.086 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.171 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76823-51B464 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.355 AND INCHES MAXIMUM 0.416 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.303 AND INCHES MAXIMUM 1.344 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.174 AND INCHES MAXIMUM 1.235 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 6150 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
Supersedes
This item replaces cancelled NIIN 000381370. An older drawing citing one of those numbers resolves here.