NSN 5305-00-338-2077 · NIIN 003382077 · FSC 5305
NO DASHES 5305003382077
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.572 AND INCHES MAXIMUM 0.619 |
| AASK | HEAD STYLE | |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.317 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76823-51B581 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.5 AND DEGREES MAXIMUM 100.5 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.302 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| CMLP | THREAD QUANTITY PER INCH | 32 |