NSN 4720-01-255-1939 · NIIN 012551939 · FSC 4720
NO DASHES 4720012551939
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT 35.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.000 |
| ADJS | EXTERIOR COLOR | GREEN |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES MINIMUM 1.485 AND INCHES MAXIMUM 1.515 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES MINIMUM 1.485 AND INCHES MAXIMUM 1.515 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES MINIMUM 1.485 AND INCHES MAXIMUM 1.515 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES MINIMUM 1.485 AND INCHES MAXIMUM 1.515 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.900 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 1.900 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 1.900 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.900 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.224 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.224 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 800.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM OVERALL 43.500 AND INCHES MAXIMUM OVERALL 44.500 |
| CTCJ | FLANGE STYLE |