NSN 5307-00-166-0974 · NIIN 001660974 · FSC 5307
NO DASHES 5307001660974
In Stock
STUD,PLAIN
Studs
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2250 TO 0.2274 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.435 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.568 AND INCHES MAXIMUM 2.588 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES MINIMUM 0.083 AND INCHES MAXIMUM 0.103 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.068 AND INCHES MAXIMUM 0.088 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.250 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
| FEAT | SPECIAL FEATURES | STUD END THREAD 0.004 IN. OVERSIZE |
| MATT | MATERIAL | STEEL COMP 8735 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6320 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |
Supersedes
This item replaces cancelled NIIN 002987707. An older drawing citing one of those numbers resolves here.